arbiter
JournalsAccount

Design, techno-economic analysis, and comparative assessment of high-temperature molten salt electric thermal energy storage systems for industrial heat decarbonization in Alberta, Canada

Abdul Saboor et al.

Applied Energy2026https://doi.org/10.1016/j.apenergy.2025.127301article
ABDC A
Weight
0.46

Abstract

Alberta’s industrial sector requires substantial high-temperature process heat, yet its extreme ambient temperatures, which can reach −40 ∘ C, present challenges for thermal energy storage deployment. This study evaluates the techno-economic feasibility of electric thermal energy storage systems using binary chloride salts (50 wt% NaCl: 50 wt% KCl) contained in engineered concrete for delivering industrial heat at approximately 700 ∘ C. A single-tank configuration with an embedded air to salt heat exchanger is operated under different thermal charging configurations, including electric heating powered by solar photovoltaic farms, wind farms, or the grid, and beam-down volumetrically absorbing concentrated solar thermal systems. Nine scenarios were evaluated under four carbon pricing trajectories over a 30-year project lifetime: CP0 (carbon price frozen at $170/tCO 2 e after 2030), CP15 (continued rise of $15/tCO 2 e annually), CP30 (accelerated increase of $30/tCO 2 e annually), and CP45 (high-stringency case with $45/tCO 2 e annual increases). Key performance indicators include round-trip efficiency, levelized cost of heat, land footprint, and use-phase emissions. Results are compared against a natural gas boiler as the reference case. Under continued carbon price escalation of $15/tCO 2 e annually (CP15), this study highlights the effectiveness of an advanced hybrid concentrated solar thermal system with electric thermal energy storage (CST E-TES), as it achieves high round-trip efficiencies of up to 90 %, the lowest levelized cost of heat among renewable options at 19 $/MWht and 83 % lower emissions than natural gas. • Technoeconomic analysis of high-temperature electric thermal energy storage systems. • 9 different charging scenarios evaluated under 4 carbon pricing trajectories to 2050. • Binary chloride salts enable stable high-temperature storage at 700 ∘ C for industry. • Embedded heat exchanger eliminates salt pumping in extreme climates down to −40 ∘ C. • Electric thermal energy storage achieves 90.2 % round-trip efficiency with molten salts.

4 citations

Open via your library →

Cite this paper

https://doi.org/https://doi.org/10.1016/j.apenergy.2025.127301

Or copy a formatted citation

@article{abdul2026,
  title        = {{Design, techno-economic analysis, and comparative assessment of high-temperature molten salt electric thermal energy storage systems for industrial heat decarbonization in Alberta, Canada}},
  author       = {Abdul Saboor et al.},
  journal      = {Applied Energy},
  year         = {2026},
  doi          = {https://doi.org/https://doi.org/10.1016/j.apenergy.2025.127301},
}

Paste directly into BibTeX, Zotero, or your reference manager.

Flag this paper

Design, techno-economic analysis, and comparative assessment of high-temperature molten salt electric thermal energy storage systems for industrial heat decarbonization in Alberta, Canada

Flags are reviewed by the Arbiter methodology team within 5 business days.

Evidence weight

0.46

Balanced mode · F 0.40 / M 0.15 / V 0.05 / R 0.40

F · citation impact0.37 × 0.4 = 0.15
M · momentum0.60 × 0.15 = 0.09
V · venue signal0.50 × 0.05 = 0.03
R · text relevance †0.50 × 0.4 = 0.20

† Text relevance is estimated at 0.50 on the detail page — for your query’s actual relevance score, open this paper from a search result.